2HA4 P58458

The Panel-Mounted "A" PILOTAIR Valve is a poppet-type pneumatic directional control valve consisting of a cam housing portion and a valve portion containing from one to four 3-way valve units.

The "A" PILOTAIR Valves’ streamlined compact design makes them especially suited for deluxe panel mountings such as in consoles or control panels. They can be mounted in either horizontal or vertical panels. The internal parts are enclosed to make them ideal for outdoors installations or other unfavorablemore working conditions.

Operating Versatility
Versatility has been designed into the operating cams. By reversing, rotating and rearranging these all-purpose cams, all the listed combinations can be made with a minimum of parts. Single unit valves for 3-way operation may be normally open or normally closed. The two unit valves have two, three, or five positions of operation as do the three and four unit valves. (See operation.) Detents can be had for two, three or five positions, or handle may be spring returned to center for three position operation.

Operation
In release position, as shown, the valve disc seats on the inlet valve seat and seals the passage from the inlet to the outlet port. The outlet port is vented to atmosphere through the center of the plunger.

As the plunger is forced downward by the cam force it seats on the valve disc. This seals the passage between the outlet port and atmosphere.

Further downward travel of the plunger unseats the valve disc from the inlet valve seat and allows inlet air pressure to flow to the outlet port.

2-HA-3 and 2-HA-4 Pilotair Valves

The 2-HA-3 and 2-HA-4 models are an extension of the 2-HA-2 models. They were created basically to furnish a housing that will operate up to four 3-way valves to provide a variety of functions.

The body assembly of the 2-HA-3 and 2-HA-4 models is made up of two 2-HA-2 bodies under a single housing. The supply port of each body requires a separate supply source. The 2-HA-3 model has one cavity plugged to provide a three unit assembly, usually cavity 1L.

These valves were designed primarily for use with multi position cylinders for Transmission Controls.

They also meet the application requirements for two different supply pressures, selector functions and directional control of up to four different circuits.

It is possible to operate all four valves with a single handle or in any combination from one to three valves with the left hand handle or with the right hand handle.

Double handle assemblies are provided for space conservation and for applications requiring two handles located adjacent to each other. Thus, two different functions can be controlled. As an example, the left handle can control direction (forward or reverse) and the right handle, range (1st, 2nd, 3rd and 4th gear). less

Unit of Measure

Specifications | Features

Specifications

Old Part #	N/A P -058458-00001 P 058458-1 P 58458-1 P058458-1 P58458-1
Handle Positions	N/A 3 (Left Handle) 3 (Right Handle)
Model	N/A 2-HA-4
Type	N/A Quadruple 3-Way Valve
Length	N/A 6 23/32 in.
Width	N/A 3 3/4 in.
Height	N/A 7 23/32 in.
Weight	N/A 4 lb1.81 kg

Features

Several new features have been designed into the Panel-Mounted "A" PILOTAIR Valve for added strength, easier maintenance and longer service life.

One-piece solid steel shaft for increased strength.
Bronze bearings in cam housing for longer wear.
Separate steel handle and hub for increased strength.
Tooth-type Nylatron plastic detents for longer wear and more positive detenting.
Internal centering spring assembly for longer wear and more positive handle centering.
Die-cast anodized aluminum body and cam housing for lighter weight, added strength and corrosion resistance.
More-positive handle latch. Available in one, two, and three positions for added flexibility and longer service lift.

Specifications

Old Part #

Handle Positions

Model

Type

Length

Width

Height

Weight

Features

Features