Catalog

4 Way / 2 & 3 Position Solenoid & Air Pilot Operated Diaphragm-Poppet Valve

TECHNICAL DATA:
Port Sizes:

Integrated Fittings for 3/8", 5/16", and 8mm tubing
Push-in fitting styles bodies available for metric tubing only (2 position only)

Working Pressure:

20 PSI minimum
150 PSI maximum
External Pilots not available

Flow:

C_v=0.7 - with Integrated Fittings
(C_v=1.3 - comparable flow to threaded part valve)

Temperature Range:

Solenoid Valve +5°F to 122°F
Air Pilot +5°F to 140°F

Media: Air (either lubricated or non-lubricated)
Materials: Polyacetal Engineering plastic with Buna N seals and diaphragms
Combination Manual Override: Locking & Non-Locking

Electrical connectors must be ordered separately. One per solenoid required. See complete listing on Solenoid Connectors page. All valves on this page come with 3/8” tube nuts designed to accommodate 3/8" x 0.062" wall poly tubing.

Recommended Tubing:

• Standard 3/8" O.D> x 0.062" wall - poly tubing
  5/16" O.D. x 0.040 wall - nylon tubing
  8mm x 1.00mm wall poly tubing

Requires optional tube nut kit (R432015289)
Valves designed for 10mm O.D. x 1mm wall poly tubing are also available.
Adapters available: 1/4" O.D. x 0.040 wall - poly tubing.
Tube nuts are supplied with each valve for 3/8" x 0.062 wall poly tubing.

The external non-locking manual override button may be pushed from one side to the other to select which delivery port is pressurized initially.

Warning: Do not energize both solenoids at same time or all ports may be pressurized or exhausted.